Obligation free quote
Enquire Now
 

more information
General Pillow Bladder and Shaped Bladder Image Gallery
Water Bladder Brochure
Related Products

Pillow tanks
Commercial and industrial bladder storage
Shaped Bladders
Open top collar and onion tanks

store a range of liquids and chemicals with the BladderPak industrial range of water bladders and pillow tanks

Shaped Bladders for custom storage of drinking water and other industrial liquids

BladderPak Industrial Water Bladders

Tough

  • Constructed from reinforced, heavy duty PVC or Polyurethane Polymer
  • Fabrics are chemical, UV and algae resistant
  • Tough materials that can withstand abrasion
  • Rough surface? Optional ground sheet

Versatile

  • Rolls up when empty to approx. 10% of fill size
  • Easy to transport to location
  • Ideal for remote locations
  • Store liquids from 600 to 600,000 litres*
  • Pillow & Bladder Tanks are all fully enclosed

Practical

  • Can be AS/NZS 4020 certified for potable water
  • Fittings size & location can be customised
  • Modular: daisy chain to increase storage space
  • BladderPak bladders are closed storage, so no: oxidation, condensation, evaporation, mosquitoes or other contamination.

^Contain:

Contaminated water, grey/black water, slurries, effluent, potable water, diesel fuel, AV gas, chemicals & oils, emergency water, temporary water storage when a tank is being repaired, remote areas and more...

BladderPak industrial range of water bladders and pillow tanks only use reinforced membranes engineered for strength^The type of material chosen will determine what can be safely stored. Due to the aggressive nature of petrol, this liquid cannot be stored.
*maximum storage space will depend on several factors including material chosen.

What is a Liquid Storage Bladder?

Made by Fabric Solutions Australia, BladderPak Industrial water bladders are self supporting, flexible containers that can be used to store all types of liquids including drinking water, waste liquids and many chemicals. The greatest benefit of a BladderPak Bladder is that they are tough, portable, and easy to install. This makes them ideal for temporary storage use or where it is difficult or too costly to build a more permanent solution.

Bladders are custom made either in the widely recognised self-supporting pillow shape or custom made as a shaped bladder to fit into containers and other suitable storage areas such as spaces in boats or yatchs, shipping containers and other irregular shaped holding tanks.

BladderPak industrial range of bladders are quick to setup

Click to see our photo gallery of different BladderPak liquid and water bladder installations.

The Main Parts of a Bladder

Tough materials are needed to withstand the high load stresses that a bladder is subjected to. That is why we only use high quality, reinforced materials.

Tough joins are needed to make sure leaks don’t occur. All seams are either HF or Hot Wedge Welded. This technique makes joins that are super strong with no glues that can fail or split apart.

A geotextile or RPVC underlay is used as a protection layer when the surface is rough. RPVC can also act as a secondary containment barrier.

Liquid containment bladders and water bladders are ideally suited for short term, but repeated use applications.

BladderPak industrial range of water bladders and pillow tanks only use reinforced membranes engineered for strength

Need Help? Why not call us
Free Call 1800 039 996

or go to the enquiry form, send a message and we will get back to you.

 

How a Water Bladder Works

As the bladder fills it will gain height but in the process will lose some width. This leads to an increase in the circumferential load (hoop stress), limiting the maximum fill height achievable.

The maximum fill height of a water bladder is usually limited to approx. 1.3m in height for very large bladders. This is why only strong materials can be used in making a bladder.

A a bladder fills, it will gain some height, but at the expense of width

Another advantage of a water bladder is that they only take up the volume of the contents. So not only can you save on space, but this means there is only a minimal amount of air trapped inside. This greatly reduces the chances of contamination from oxidation, condensation or insects. Plus there will be no evaporation.

Bladder and Pillow Tank Brochures

Enquire Now
You are welcome to download our brochure in pdf format.

 

store a range of liquids and chemicals with the BladderPak industrial range of water bladders and pillow tanks

Shaped Bladders for custom storage of drinking water and other industrial liquids

BladderPak Industrial Water Bladders

Tough

  • Constructed from reinforced, heavy duty PVC or Polyurethane Polymer
  • Fabrics are chemical, UV and algae resistant
  • Tough materials that can withstand abrasion
  • Rough surface? Optional ground sheet

Versatile

  • Rolls up when empty to approx. 10% of fill size
  • Easy to transport to location
  • Ideal for remote locations
  • Store liquids from 600 to 600,000 litres*
  • Pillow & Bladder Tanks are all fully enclosed

Practical

  • Can be AS/NZS 4020 certified for potable water
  • Fittings size & location can be customised
  • Modular: daisy chain to increase storage space
  • BladderPak bladders are closed storage, so no: oxidation, condensation, evaporation, mosquitoes or other contamination.

^Contain:

Contaminated water, grey/black water, slurries, effluent, potable water, diesel fuel, AV gas, chemicals & oils, emergency water, temporary water storage when a tank is being repaired, remote areas and more...

BladderPak industrial range of water bladders and pillow tanks only use reinforced membranes engineered for strength^The type of material chosen will determine what can be safely stored. Due to the aggressive nature of petrol, this liquid cannot be stored.
*maximum storage space will depend on several factors including material chosen.

What is a Liquid Storage Bladder?

Made by Fabric Solutions Australia, BladderPak Industrial water bladders are self supporting, flexible containers that can be used to store all types of liquids including drinking water, waste liquids and many chemicals. The greatest benefit of a BladderPak Bladder is that they are tough, portable, and easy to install. This makes them ideal for temporary storage use or where it is difficult or too costly to build a more permanent solution.

Bladders are custom made either in the widely recognised self-supporting pillow shape or custom made as a shaped bladder to fit into containers and other suitable storage areas such as spaces in boats or yatchs, shipping containers and other irregular shaped holding tanks.

BladderPak industrial range of bladders are quick to setup

Click to see our photo gallery of different BladderPak liquid and water bladder installations.

The Main Parts of a Bladder

Tough materials are needed to withstand the high load stresses that a bladder is subjected to. That is why we only use high quality, reinforced materials.

Tough joins are needed to make sure leaks don’t occur. All seams are either HF or Hot Wedge Welded. This technique makes joins that are super strong with no glues that can fail or split apart.

A geotextile or RPVC underlay is used as a protection layer when the surface is rough. RPVC can also act as a secondary containment barrier.

Liquid containment and water bladders are ideally suited for short term, but repeated use applications.

BladderPak industrial range of water bladders and pillow tanks only use reinforced membranes engineered for strength

Need Help? Why not call us
Free Call 1800 039 996

or go to the enquiry form, send a message and we will get back to you.

 

How a Water Bladder Works

As the bladder fills it will gain height but in the process will lose some width. This leads to an increase in the circumferential load (hoop stress), limiting the maximum fill height achievable.

The maximum fill height of a water bladder is usually limited to approx. 1.3m in height for very large bladders. This is why only strong materials can be used in making a bladder.

A a bladder fills, it will gain some height, but at the expense of width

Another advantage of a liquid or water bladder is that they only take up the volume of the contents. So not only can you save on space, but this means there is only a minimal amount of air trapped inside. This greatly reduces the chances of contamination from oxidation, condensation or insects. Plus there will be no evaporation.

Bladder and Pillow Tank Brochures

Enquire Now
You are welcome to download our brochure in pdf format.

 

Tap to call us on 1800 039 996

Tough

Made from reinforced, tough PVC or Polyurethane that is chemical, UV, algae and abrasion resistant.

Versatile

Packs away to only 10% of fill size when empty, making it an ideal deployment for remote areas. Daisychain BladderPak for unlimited storage.

Practical

BladderPak can be certified for potable water storage, plus all fittings can be customised. Because BladderPak is a closed storage solution with no air gaps, so contamination is greatly reduced.

^Contain:

Contaminated water, grey/black water, slurries, effluent, potable water, diesel fuel, AV gas, chemicals & oils, emergency water, temporary water storage when a tank is being repaired, remote areas and more...
BladderPak industrial range of water bladders and pillow tanks only use reinforced membranes engineered for strength^The type of material chosen will determine what can be safely stored. Due to the aggressive nature of petrol, this liquid cannot be stored.
*maximum storage space will depend on several factors including material chosen.

What is a Liquid Storage Bladder?

Made by Fabric Solutions Australia, BladderPak Industrial bladders are self supporting, flexible containers that can be used to store all types of liquids including drinking water, waste liquids and many chemicals. The greatest benefit of a BladderPak Bladder is that they are tough, portable, and easy to install. This makes them ideal for temporary storage use or where it is difficult or too costly to build a more permanent solution.

Bladders are custom made either in the widely recognised self-supporting pillow shape or custom made as a shaped bladder to fit into containers and other suitable storage areas such as spaces in boats or yatchs, shipping containers and other irregular shaped holding tanks.

BladderPak industrial range of bladders are quick to setup

The Main Parts of a Bladder

Tough materials are needed to withstand the high load stresses that a bladder is subjected to. That is why we only use high quality, reinforced materials.

Tough joins are needed to make sure leaks don’t occur. All seams are either HF or Hot Wedge Welded. This technique makes joins that are super strong with no glues that can fail or split apart.

A geotextile or RPVC underlay is used as a protection layer when the surface is rough. RPVC can also act as a secondary containment barrier.

Liquid containment bladders are ideally suited for short term, but repeated use applications.

BladderPak industrial range of water bladders and pillow tanks only use reinforced membranes engineered for strength

How a Bladder Works

As the bladder fills it will gain height but in the process will lose some width. This leads to an increase in the circumferential load (hoop stress), limiting the maximum fill height achievable.

The maximum fill height of a water bladder is usually limited to approx. 1.3m in height for very large bladders. This is why only strong materials can be used in making a bladder.

Another advantage of bladders is that they only take up the volume of the contents. So not only can you save on space, but this means there is only a minimal amount of air trapped inside. This greatly reduces the chances of contamination from oxidation, condensation or insects. Plus there will be no evaporation.

A a bladder fills, it will gain some height, but at the expense of width

Tap to call us on 1800 039 996


To Translate this page, please select a language below



Trade Enquiries

Fabric Solutions Australia welcomes enquiries from retailers looking to expand their product range. Our depth of knowledge and large manufacturing facilities will enable you to tackle any job, large or small. For further details on the products we can provide retailers, wholesalers and distributors, please call 1800 039 996 or email us at sales@fabricsolutions.com.au.
Copyright Fabric Solutions Australia © - 2017